www.trailrideraustralia.com
http://www.trailrideraustralia.com/

Lakeside Motard - Small Wheel Sunday
http://www.trailrideraustralia.com/viewtopic.php?f=465&t=5114
Page 1 of 8

Author:  dangles2 [ Wed 15 Feb, 2012 8:28 pm ]
Post subject:  Lakeside Motard - Small Wheel Sunday

hey stopped off at lakeside on sun and checked out their motard track..looks like heaps of fun only $50 for the day..I'm gunna give it a go..gotta get some axel and peg sliders first..anyone else done this????

Author:  Jtheboy [ Wed 15 Feb, 2012 8:30 pm ]
Post subject:  Re: lakeside motard

dangles2 wrote:
hey stopped off at lakeside on sun and checked out their motard track..looks like heaps of fun only $50 for the day..I'm gunna give it a go..gotta get some axel and peg sliders first..anyone else done this????




Don't you need leathers? dontknow

Author:  pneumatic [ Wed 15 Feb, 2012 8:31 pm ]
Post subject:  Re: lakeside motard

I didn't realise they have a motard track, I'll have to get out there. I have axle sliders, but no peg sliders yet. Probably need to tie-wire stuff and add a catch can too?

Author:  dangles2 [ Wed 15 Feb, 2012 8:40 pm ]
Post subject:  Re: lakeside motard

nuh don't need leathers...run by smallwheels club on facebook..spoke to one of the organisers ..$50 i think you just have to run watyer in the rad for the day..sweet

http://www.facebook.com/#!/groups/257029423989/

Author:  dangles2 [ Wed 15 Feb, 2012 8:44 pm ]
Post subject:  Re: lakeside motard

have to have a motard day for all us speed freaks..you could prob run road tyres on std wheels if you want..cheap option

Author:  pneumatic [ Wed 15 Feb, 2012 9:42 pm ]
Post subject:  Re: lakeside motard

http://swslakeside.46.forumer.com/sws-i ... 05472.html

The following rules apply to all Motard bike classes:
All bikes must comply with these guidelines at all times.
*Overflow bottles for oil, carburetor and cooling system must be fitted (must have)
*All bikes must comply to the 90db noise limit.
*Handlebars must have ends plugged or have bark busters with adequate nylon/plastic covering
*Footpeg, front and rear axle sliders must be fitted


Protective Gear: Helmets must have an Australian approval rating of AS1698 or FIM approval rating. Helmet must have full face shield or goggles and must be made of a shatter-proof material and be in the closed position when racing.
Suitable protective attire made of durable fabric must cover the body. Suits made of leather or a combination of both leather and fabric with protective armor on shoulders, elbows and knees is ideal.
Back (spine) protectors or built in back protection is optional but a great idea.
Footwear must be closed in with ankle coverage.
Gloves must be made of leather or durable fabric and must be in good shape without holes. Severely damaged or worn gloves are unacceptable.

Author:  Shane-O [ Thu 16 Feb, 2012 1:33 pm ]
Post subject:  Re: lakeside motard

i use to race out there 2 years ago. heaps of fun. use to run the mini tard and the postie bike i have. have been thinking of late to run the postie bike out there a few times this year.

Kim and Glen the people who run small wheel sundays out there are pretty good. you need to comply with noise standreds tho which can be hard with bigger bikes. but do give a bit of leway if that can see you have tried.

def catch can's and float bowl cans, as this was why i lost it into the first corner 2 years ago and ended up with a 3r deg burn on my ass after losing the rear in a fuel/2stroke puddle. not a nice feeling at 100kph!


you's will all love it. motards are taking of out there.

search them on FB small wheel sunday and ask to join the group.

Author:  dangles2 [ Thu 16 Feb, 2012 7:12 pm ]
Post subject:  Re: lakeside motard

looks like someones been doin some research...minor stuff..if you have gone the motard for the road you should have most of the gear..ideas for sliders???

Author:  pneumatic [ Wed 06 Jun, 2012 10:19 am ]
Post subject:  Re: lakeside motard

So did you get out there yet Dangles? I've almost got my bike ready, just need to sort the catch can and 90db exhaust.

I'm hoping to make the next meet on the 17th of June.

Attachments:
s_readyformotard.jpg
s_readyformotard.jpg [ 131.23 KiB | Viewed 5689 times ]

Author:  MR-NONAME [ Wed 06 Jun, 2012 1:04 pm ]
Post subject:  Re: lakeside motard

pneumatic wrote:
So did you get out there yet Dangles? I've almost got my bike ready, just need to sort the catch can and 90db exhaust.

I'm hoping to make the next meet on the 17th of June.

and ya still got lots of rome for the SHEEPDOG.....

Author:  Travop [ Wed 06 Jun, 2012 10:06 pm ]
Post subject:  Re: lakeside motard

Hey shaneo when you taking the postie out for a spin?

Author:  Shane-O [ Thu 07 Jun, 2012 9:13 am ]
Post subject:  Re: lakeside motard

Travop wrote:
Hey shaneo when you taking the postie out for a spin?


not sure maybe when i can be stuffed. lol

Author:  pneumatic [ Mon 18 Jun, 2012 8:19 am ]
Post subject:  Re: lakeside motard

Kim asked where you were Shane-o, and when your coming out next :)

I had a great time out. Me and my mate Matt really enjoyed our first trackday.

Me on the left, Matt on the right

Image

Author:  Shane-O [ Mon 18 Jun, 2012 9:42 am ]
Post subject:  Re: lakeside motard

One day, lol

Author:  pneumatic [ Tue 19 Jun, 2012 10:37 pm ]
Post subject:  Re: lakeside motard

Some more pics;
Image

Image

Image

Image

Image

Image

Image

Image

Image

Page 1 of 8 All times are UTC + 10 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/